John Bowen Synth Design

One followup related to the mixing observations...

Suppose I have: Osc1,Osc2,Osc3,Osc4 going to Mixer1.

Can I also still use the Rotors and Vectors as Sources, etc. So for example, can I have Rotor1 as Input1 to Mixer2, and Vector1 as Input2 to Mixer2 and so on?

I'm assuming the answer is yes...

Yes, of course. For a lot of the plug-in presets, you will actually find the same oscs being used repeatedly in several mixers, just with different filtering and so on. But each mixer is freely assignable from the Mixer input list.

Also, on the plug-in I had a Modulation Mixer with 4 inputs, and the output appeared in the Mod Source list. What I'd like to add to the regular mixers are all the mod sources as well, so then you could use these mixers for audio or modulation mixers. But this probably won't make it into v1.0.
-john b.

And the same Osc's can have seperate Filter/EG combos also.
This is one w/o the Mod's which rev. 1.0 should be like.

http://www.planetz.com/forums/download/file.php?id=3915