Page 1 of 1
Delay time over 1 second can not be adjusted with data wheel
Posted: Fri Jun 28, 2013 5:13 am
by Neutron
It's quite important, if you need an exact delay time to match your tempo.
Re: Delay time over 1 second can not be adjusted with data w
Posted: Fri Jun 28, 2013 9:01 am
by John Bowen
Good bug find! Thanks!
For now, you will have to use the keypad to enter the value...keep in mind, you can only get a resolution by 10ths (so, 1.1 sec, 1.2, 1.3, etc.)...but this would be the same with the data wheel as well.
Re: Delay time over 1 second can not be adjusted with data w
Posted: Fri Jun 28, 2013 6:50 pm
by Neutron
i hope it can be better than 10ths one day, at least 100ths so it keeps the same resolution as the below 1 sec (maybe the display field could have the second underlined or inverted to not waste a display spot for the decimal.)