Newbie here so hopefully my error. In both bitwig (dl'd to test) and Logic X (main DAW), when the solaris is receiving clock (transport in DAW running) and the delay fx is synced to midi clock, there are clicks. They are intermittent (every 5-20 seconds). If you stop the DAW transport, no clicks occur.
The clicks feel like the type you get if you unsync delay clock, and change the delay time manually.
...i'll leave being completely unable to get the usb midi clock receiving from Logic X for another post
Midi intermediary is a MOTU fastlane.
Can anyone else recreate this?
steps:
any INIT patch
take off the EG1 modulation of the cutoff.
turn cutoff down a lil bit (61, res 0)
turn on arp with hold on a note (mid C)
adjust clock ON, and delay L to 1/16 and R to 1/2
wet about 40%
to make it more evident turn dry off, and feed L & R to about 40%.
Clock must be running on DAW.
Cheers!